Brake fluid on the body surface coating has a destructive effect, will produce "bite paint phenomenon."
therefore, in the replacement and filling brake fluid, to prevent the brake fluid dripping on the body of the coating to corrode the surface of the loader, so that the machinery to produce Rust. It is strictly forbidden to mix with other brake fluid. Due to the different kinds of products used in different raw materials, additives and manufacturing process, the mixture will be cloudy or precipitation phenomenon, which will not only greatly reduce the performance of the original brake fluid, and precipitation particles will clog the pipeline caused by the serious consequences of brake Failure.
Even the same kind of brake fluid with better solubility can not be mixed if the brand is Different.
Pour a little brake fluid in the palm of the hand, the true brake fluid will feel some cold first, a moment later will feel some heat, and brake fluid is not easy to evaporate, if you feel the brake fluid abnormal cold, No heat feeling, and will slowly evaporate, it is likely to be false brake fluid. Before changing the brake fluid, be sure to put the brake system add liquid mouth, gas screw, such as oil, dirt and other clean, prevent impurities into the braking system contaminated brake FLUID. should be in accordance with the provisions of the maintenance manual cleaning braking system, promote the use of the same model of brake fluid cleaning brake system Each pipeline, try not to use alcohol, cleaning agents and so On.
