Widely Used in Quarry Mining Small Screw Sand Washer, Sand Washing Machine

We have been specializing in Mucking Loader For Hydropower Station Project, Underground Mining Equipment, Underground Tunnel Small Excavator for many years and have accumulated a wealth of experience that continues to provide the impetus for the company's growth. We will continue to adhere to our own characteristics, strive to build a competitive advantage, and earnestly fulfill our social responsibilities Employees are the most valuable resources of our company. Respecting individuals, fully authorizing, paying attention to the environment and the quality of employees are the driving force of our company's development. The company seizes the opportunity and continues to accelerate its development, and has now established a sales network covering multiple cities.

Small Mining Machine

5.2 Operation steps

5.2.1 The insertion board of transport pan is lowered to the ground. The specific operations are shown in Figure 2-3 Operation Diagram.

5.2.2 Operate the machine to move forward, gather the stone together, and then level the ground.

5.2.3 Confirm that the transferring vehicle enters into the unloading part of the machine, and then the handle is pulled to the position of positive transport.

5.2.4 Operate the pilot valve so that the big arm is lifted up, small arm is extended out, and then the bucket is placed in the position which aligns with the small arm. And then the big arm is lowered, small arm is withdrawn (big arm is jogging up and down), so the stone can be grilled into the transport pan. The rotary arm can pick stones in a wide range. The appropriate withdrawal and extension of bucket according to different distances will facilitate stone picking. During picking, all kinds of arms cannot be moved to the limit position, so as to avoid frequent transition impact and shorten the service life of the machine. Meanwhile, it can avoid high temperature caused by frequent overflow due to overload valve. It shall be specially noted that the bucket cannot directly hit the transport pan, otherwise it will cause the serious deformation of the transport pan.

5.2.5 During picking, always check whether the scraper chain is in the normal delivery. If stuck, the delivery shall be promptly stopped. Otherwise, the temperature will rise rapidly due to overload, and then the machine cannot continue to work. The method to solve clamping of scraper chain: the joy stick for positive transport is pulled in the neutral position; the joy stick for transport is pulled back and forth so that the scraper chain achieves quick positive

       and negative impact so as to release the scraper chain. When there are stones in the transport pan, the transport joy stick cannot be stopped in the position of negative transport, otherwise the chain or scraper may be broken, seriously affecting production.

5.2.6 To stop during walking, the pilot valve of brake pedal can be placed in the neutral position. For long-time parking, the shovel plate in front of machine shall be pressed on the ground.

5.2.7 Before walking or reversing of loader, the bell shall be started as a warning signal.

General drawing:

electrical motor & oil pump assembly:

Driven by science and technology, we continue to develop new energy-saving, environmentally-friendly and efficient Widely Used in Quarry Mining Small Screw Sand Washer, Sand Washing Machine to the market to provide customers with more satisfactory products and more considerate services. We are committed to technology research and development, strive to create all-round and multi-level products, and work hard to achieve the maximum satisfaction of customers. The company's employees forge ahead and make concerted efforts to develop new technologies and new products in line with market demand and development.